Indoor pools are often pretty stunning. In northern climates, they are quite the attraction in hotels & condominiums & apartment buildings. They provide year round enjoyment for millions of people around the world as they vacation or just go about daily living. Indoor pools provide terrific places for low-impact and “zero gravity exercise” for healthy individuals as well as those who may need physical therapy. You’ll find them in many towns and cities across the country. Schools, community centers, are busy with swimmers twelve months each year. Indoor pools are not just for the rich! Lately your decade-old swimming pool has become a source for most of your expenses but you can remove it by contacting our Sydney pool removal.

More importantly, indoor pools require special treating. Yes, they are swimming pools. Yes, they have the same type of filtration systems that outdoor pools have. But there are differences in the care that is required. This article will help you to understand those needs.

There are 4 main concerns of indoor pools that need to be addressed: Odors, Oxidation, Bather Load, and General Care.

Indoor Pool Odors. Who hasn’t walked into a hotel or building and there is that immediate “pool chlorine” odor? You KNOW that the facility has a swimming pool! The question is why? Why does it have to be that noticeable? Many people wonder and question – sometimes rightfully so – how well the pool is being cared for. Indoor pools should not “smell.” Will they have an odor? Yes, but they should not smell. If a pool smells – especially if the odor is acrid or pungent – you can be sure that something in the pool is not right. And if your eyes become irritated, the situation could be even worse. Keep in mind that the problem is NOT the chlorine. The problem is the water balance.

Water balance is the single most often misunderstood problem of pool care and how great a difference it makes. When water balance is incorrect, nothing works right chemically: chlorine or sanitizer efficiency is affected, the water can become cloudy, the water can become irritating to skin, hair & eyes, the water smells, etc.

Briefly, high pH and total alkalinity lead to “slow” and inefficient chlorine and sanitizer activity. Algae & bacteria growth is promoted leading to cloudy water. Some eye irritation and a sometimes “slimy” feel. Low pH and total alkalinity lead to “too fast moving” chlorine or sanitizer; the water may be very clear but has a strong odor as well as an acidic “feel”. Chlorine is more rapidly used up and exhausted.

In cases of pools having attached spas, chemicals and bather wastes are aerosolized and spewed into the surrounding air.

A further problem is the continual formation of chloramines or combined chlorines or bromines. These form when there is excess waste like nitrogen. Sanitizer efficiency is severely reduced and a pungent “chlorine” odor is emitted. Chlorine “odor” is fine. Think of a bathroom or sick room that has been cleaned with chlorine (bleach). The odor left behind tells you that it is CLEAN. That’s the chlorine odor we want. This leads us to the question of Oxidation.

Oxidation. The bottom line is indoor pools need to be shocked as often as, if not more often than, outdoor pools. In the oxidation process (shocking or super chlorinating), unfiltered or not filterable waste (greases, body oils, body powders, perfume, nitrogen) are oxidized (burned off) are released into the atmosphere or surrounding air.

But the pool is indoors. What happens then? That’s exactly the point. Many of those “gassed-off” wastes can’t fully gas off. What essentially happens is that these wastes literally hit the ceiling and fall back down into the water. The problem is made worse in cases of poor ventilation. Ventilation can be in the form of fans, open doors & windows, ventilation systems, whatever it takes to change the air and bring in fresh.

A similar situation exists with spas & hot tubs where insulating covers trap heat, but also when not removed for extended periods of time (several hours per week), odors and chloramines, bromines & other unwanted odors accumulate.

Even in the middle of winter it is a very wise idea to do a monthly super shock (2 to 3 times the normal amount of chlorine or shock), remove the solar blanket or automatic cover, open the windows and let all of that stuff just get out of the house.

Oxidation also occurs via direct sunlight. UV light is an excellent oxidizer. The more direct sunlight you can get on the pool, the better. This is one the real problem areas with indoor pools; there’s just no sunlight on the pool for 5 or more hours each day. Direct sunlight can dramatically cut down on the amount of water mold and even algae (notice that most of these problems typically start in “shady” areas of the pool).

Bather Load. Bather load is exactly that: how many people are using the pool at a time. Obviously, hotels, condominiums and other commercially operated pools have greater use. The more people using the pool, the more stuff is being put in (as mentioned above). The more a pool is used the better from a circulation & even from a “cleaning” (feet & bodies rubbing and touching the pool surfaces) point of view.

In commercial pools, shocking may need to be done 2 to 4 times each week to break up swimmer waste, chloramines and other stuff. This is especially necessary after large events with above average swimming use.

Similarly in residential pools, even though the bather load is less, it still must be shocked.

Weekly at least.

Do not put the solar blanket or automatic cover back on for at least 3 to 5 hours to allow proper gassing off the oxidized waste.

General Maintenance. A little more care in maintenance is needed with indoor pools. Why? Three general of reasons: lack of sun, year round use, perception that “it’s indoors, nothing’s getting there.”

We’ve already looked at the lack of sun. Regular oxidizing of the pool is paramount.

Year round use is just that. The pool is available 24/7 wherever you are. The filter needs to operate 8 to 12 hours each day. Period. With that in mind, the pool needs good, regular cleaning. That means weekly vacuuming of the pool interior. If you don’t feel vacuuming is necessary, then at a minimum brush the pool walls and bottom weekly. Brushing aids in breaking up biofilms, algae, water mold (even though you may not see these problems).

No matter what type of filter your pool utilizes – sand, cartridge or DE – be sure to chemically clean the filter every 3 months with a good filter cleaner. Backwashing of sand or DE filters and rinsing of cartridge filters only removes dirt and debris; it will not remove filtered greases, oils, and body wastes. Filter chemical cleaners break up these accumulations. Here’s the analogy: would you rinse dirty clothes or launder them with detergent?

Solar blankets and automatic pool covers need regular cleaning. Solar blankets should be removed and chemically cleaned (for the same reasons that you chemically clean a filter) at least twice each year. Automatic covers are a different story. They are almost impossible to remove and clean, although the same build-ups occur and affect the water. When you have dealt with cloudy water or algae in an indoor pool that has a blanket or automatic cover, there is 90% or higher probability that the problem started with the cover being dirty or having a bio-film.

Bio-films are just that (see our other articles dealing directly with bio-films) a film of bio-matter or bacteria growing on a surface. What is a surface? In the pool a surface is the walls and floor of the pool, the ladder or rails (both inside and outside of the rail), underneath the treads, light lenses, behind the light in the niche, the back side of the skimmer flap (weir), directional returns (eyeballs), safety ropes and floats, pool toys, etc. I think you understand.

Bio-films are the breeding ground that can later develop into algae, pool mold (white water mold), or pink slime. If there is a surface and it becomes wet or moist, a bio-film will grow. To remove bio-films in the not so obvious areas, use products such as AquaFinesse or sphagnum moss products such as PoolNaturally; these products will remove the bio-film and then prevent it from returning. Reports are coming back to us showing that regular use removes bio-films even on the underside of solar blankets and automatic pool covers.

Enjoy your pool & treat it right. You’ll have much less work to do.

http://www.parpools.com

[http://www.pool-care.net]

Article Source: http://EzineArticles.com/expert/Ronald_Parrs/48704

Article Source: http://EzineArticles.com/3413145

If an electrical outlet in your home has suddenly stopped working, your first instinct is probably to check the circuit breaker that it is connected to. If it turns out the circuit breaker hasn’t been tripped, then you may be dealing with a more difficult problem. There are a number of different reasons why an outlet will stop functioning without tripping the breaker. Some of them require the attention of a professional electrician Melbourne CBD. Others you can do yourself.

Tripped GFCI

Many modern electrical power outlets are equipped with ground-fault circuit interrupters, or GFCIs. These devices are included in the outlet to reduce the possibility of electrocution. When the GFCI senses a current leak, it disconnects the terminals inside the outlet, cutting off power to it. You can tell if your outlet has a GFCI by the presence of a “Test” button and a “Reset” button. A random passing event such as a power surge can cause a GFCI to trip. Push the “Test” button to ensure power has been shut off to the outlet; then press the “Reset” button to restore power.

Hidden Tripped GFCI

If this fails to work, or if your outlet does not have a GFCI, then you need to look at other outlets. Sometimes a GFCI in one outlet is responsible for protecting several other outlets further down the line from it. Look in other rooms, closets, hallways and anywhere else you might have a GFCI . Hit the “Test” button, then the Reset” button, on each of them and keep going back to find out if this has fixed your problem.

Broken GFCI

It is possible that the reset button on the GFCI is broken or that the wiring inside the GFCI is broken. In this case it will have to be repaired or, more likely, replaced. Click here to contact an electrician for help with this work if you do not have proper electrical wiring training.

Bad Connection

Of course, the issue might not be the GFCI at all. If one of the wires or contacts in the outlet, or in the wiring to or from the outlet, is broken, there isn’t a complete path for the electricity to travel. In such a case, the outlet will not work even though it has not tripped the circuit breaker. You should be particularly concerned that this is the problem if you have had recent work done on the outlet, the wall around it, or anywhere else on your home’s electrical system. It’s likely that a professional electrician is needed to properly diagnose and repair this problem.

For some, removing a swimming pool may seem like removing a house. Once you realize it can be done, you may be thinking…but how? How can a huge, concrete based pool that takes up my entire yard be removed safely and efficiently? All kinds of questions may be going through your mind: Will we disrupt the neighbors? How will they get a bulldozer into my yard? What if they hit a gas or water line? Lets face it, fear and anxiety are the emotions we feel when faced with the unknown. These are the emotions that make scary movies, giant roller coasters and haunted houses so compelling, but when you are hiring a pool removal contractor the last thing you want to feel is fear. So how do you handle this process? How do you hire a pool removal contractor in the bay area or anywhere else? The best way to do it is to simply eliminate the unknowns. Our swimming pool removal Sydney did a safety job in pulling the pool in which they service.

When it comes to hiring a swimming pool removal company here is the best advice I can give you: Hire a company that has removed a lot of pools. That’s it. It’s just that simple. Practice really does make perfect. Plus, there’s a reason why a particular contractor has done a lot of work. People trust them – they have a track record. It’s no different than if you needed brain surgery and you were interviewing surgeons. If the doctor told you it would be his first, but another other one had done a hundred procedures, who would you pick? You’d probably be concerned about the outcome if you chose the first doctor. Same goes for pool removal. Pick a contractor that knows their stuff!

So, you have started the search. You are calling contractors and talking to friends. How much experience should your pool demolition contractor have? One hundred pools or more certainly would be a high benchmark. If a company has removed that many swimming pools, they understand all the pitfalls and problems that can arise. That makes it much more likely your job will get done right and in a timely manner. It’s an important job, one you want done right. Going with the right contractor could mean the difference between getting it done cleanly and simply in just a few days versus it taking weeks and potential legal hassles. Keep it simple.

Here’s another bit of advice: Always check the references of pool removal contractors. People have been getting burned by contractors of all types for years because of not following this step. You especially want to do this if you live in an area where there aren’t a lot of in-ground swimming pools. The chances of any one contractor having a great deal of pool removal experience won’t be high. The important thing is that you can verify the jobs they have done, and see if their customers were satisfied with the contractors work. Do yourself a favor, check them once and check them twice – call at least 3-5 of their former customers. See what they thought of the work performed. It could save you a huge headache later.

The other thing I always tell people concerns money: Be very leery about giving a contractor money in advance. Did you know that most states have laws about how much money a contractor can ask for up front? Its true. It seems that people have been getting burned by contractors for so long, that the government finally had to step in. If you are serious about your pool removal and want to do it right, you might make it a point to know what your state law is regarding this. Generally, it’s a very small percentage of the contract price. In cases where permit fees are high and it takes a long time to get approval, contractors may want the customers to cover those costs. Bottom line: If a contractor asks for a lot of money up front, do yourself a favor: don’t do it!

The main point I want to get across is this: do a little home work before hiring a contractor. A pool removal is a big deal. It can be expensive. You really need to ensure that it is done professionally, and at the right price. Whatever you do, don’t go with the first bid that comes your way. And if a particular contractor seemed a little shady – trust your instincts, they probably are. Keep looking! When you have confidence that your contractor can deliver, then you can relax and actually enjoy the process. Think about it: your new backyard and new lifestyle are waiting!

If you need help finding a pool removal contractor contact me at [email protected]. I would love to help you!

http://www.poolitout.com/

Article Source: http://EzineArticles.com/expert/Verdell_Lassiter/290831

Article Source: http://EzineArticles.com/2059209