Introduction

Whether you’re a DIYer or just looking for a new way to cut glass at home, this method can help. It’s cheap and easy to do, and it results in a rough edge that needs to be sanded down before you can use your new square of glass. Buy window glass during your home remodel, or window replacement project.

You can cut glass to size using water, baking soda and a microwave.

You can cut glass to size using water, baking soda and a microwave.

You will need:

• Pint-sized glass bottles with lids or caps that are not made of plastic. These bottles can be reused for other purposes after you cut them open. You can find these at craft stores. You may also be able to source them from local businesses that sell bottled beverages in bulk; do not use old beer bottles!
• Water
• Baking soda (not baking powder)

This will result in a rough edge that needs to be sanded down.

The easiest method for cutting glass to size is to use a saw, but this can be dangerous if you’re not an experienced cutter.

Another option is using a diamond wheel or grinder, but these tools also require experience and come with the same inherent dangers as using a saw.

For those who don’t have access to these types of equipment or who prefer not to use them, there are other options for cutting glass that don’t involve power tools. A laser can be used to cut glass into shapes; however, it’s important to consider the need for safety glasses when working with lasers because they can cause permanent blindness if you’re exposed directly while they’re on. There are also tools available at hardware stores (like those used by plumbers) which can be used in place of power tools like saws and grinders; however, there are still many risks associated with this method due primarily to inexperience with these types of tools (e.g., burns from hot water).

You need to use a microwave-safe container with a flat bottom.

It’s important to use a microwave-safe container when making this project. This means the glass will be able to withstand high temperatures without shattering.

You should also select a container with a flat bottom, as opposed to one that has a curved or rounded bottom. The reason for this is that the glass needs to rest on something flat in order for it to be properly supported and not tip over during heating in your microwave oven.

If you plan on using your own mug as opposed to buying one specifically for this project, make sure it isn’t too tall or wide—the lid from an old coffee mug might look nice, but it won’t fit inside most microwaves!

This method will also work if you use sugar instead of baking soda.

While baking soda is less abrasive than sugar, it’s still not ideal for delicate glass. If you don’t have baking soda on hand, or if the piece of glass is too small to allow for repeated use of the microwave, then sugar will work just fine. The method is the same as using baking soda.

Just add a few drops of water and mix together until there are no lumps of dry powder left in your bowl. Pour some onto your hot plate and place the glass on top of it. It should begin to bubble almost immediately! Make sure that you keep an eye on this process so that you can pull out your piece when done properly (once bubbles stop appearing).

Cutting glass at home doesn’t have to be so difficult!

Cutting glass at home doesn’t have to be so difficult! It’s a great way to save money and recycle used glass, but if you don’t do it correctly, you can end up with jagged edges that are sharp enough to cut your hands.

The solution? Cut it in the microwave!

In this tutorial, I’ll show you how to use water, baking soda and some elbow grease (and maybe some safety goggles) to make any type of windowpane into the exact size you need.

Conclusion

Cutting glass at home doesn’t have to be so difficult! Try this method next time you need to cut some glass for your project or hobby. It’s quick, easy and doesn’t require any special tools besides a microwave-safe container with a flat bottom (or sugar instead of baking soda).

Introduction

The zero waste movement is growing in popularity. Thanks to the internet, we now have access to the tools and resources to make this lifestyle change possible. However, going “zero waste” can seem like an overwhelming task at first. It takes time and effort (lots of it!) but if you start small with these tips on how to become a zero waster, you’ll be off on your way towards living a more sustainable life! Skip bin hire Adelaide maintains zero waste in their area.

It’s hard to go “zero waste”

It’s important to recognize that going “zero waste” is a process. It doesn’t happen overnight, and it will take you some time before you reach your goals. You can start with small changes and work your way up from there.

For example, if you want to reduce your waste as much as possible, then consider buying products in bulk at the grocery store or farmer’s market instead of individually packaged items. In other words, buy one big container (this is much more sustainable) and divide it into smaller containers at home after opening it up so that they’re ready for use – this way you won’t need plastic bags for storage either!

Zero Waste Strategy

• Start small. When you begin your zero waste journey, it’s tempting to try to tackle every aspect of your life at once: “I’ll start by making my own toothpaste, then I’ll make all my own laundry detergent and soap! Next thing you know, I’ll be making my own bread and growing all my food!” While this may be a noble endeavor (and one that will certainly provide many challenges), it’s also overwhelming. It’s likely that if this is the first time you’ve considered going zero waste, such an intensive approach will only result in frustration and failure.

Instead, start small—in particular, with things that aren’t cheap or easy. Think about it: If you can make one thing yourself for free instead of buying something for $5 or $10 from the store every week or month (or whatever), then not only are you saving money but also helping reduce waste overall. Making your own lip balm from beeswax is probably too difficult for most people; replacing your shampoo bar with Dr Bronner’s Castile Soap is much more realistic and sustainable over time!

Zero Waste Strategy 1. Use What You Have

Your first step towards a zero waste strategy is to use what you have. Just because you’re trying to be more sustainable doesn’t mean you can’t still do the things that make you happy. As an example, when my best friend was visiting from New York City, I asked her if she wanted me to go buy some coffee for us at Starbucks. She said no thanks and that she’d rather just drink tea out of her mug. By not buying anything new, we saved money and kept our waste down because we didn’t need plates or cups at all!

It’s also great fun making your own things like bath bombs or lip balm as gifts for friends or family members! You can get creative with different flavors by adding natural oils like peppermint oil or coconut oil instead of store-bought artificial scents (which often contain potentially harmful chemicals). It only takes a few minutes once you’ve got the right ingredients ready before hand so don’t worry about being stuck doing something boring while everyone else has fun in their own way!

Zero Waste Strategy 2. Eliminate Paper Towels

“Okay, okay. I get it! Paper towels are bad. Why don’t I just use cloth rags instead?” you ask.

First off, they won’t do the job as well as paper towels, and neither will sponges or a kitchen towel (which is basically just a larger version of said sponge). You need something that can soak up large amounts of liquid without falling apart. This means you should be using a microfiber towel like the ones used by car detailers. They come in a variety of colors and sizes and can quickly absorb liquid without disintegrating into smelly pieces of stringy cotton fiber like old-fashioned rags tend to do when they’re wetted down with some cleaning solution or other water-based liquid product such as dish soap or hand sanitizer gel oil mixture .

Zero Waste Strategy 3. Go Container-less

When you have a zero waste lifestyle, you don’t rely on disposable containers to store, prepare or transport food. Instead, you use reusable containers that can be easily washed and reused again. This saves both money and time because you won’t need to buy new storage items every time something breaks or spills. At first glance it might seem like this would leave your kitchen looking cluttered with lots of random jars lying around everywhere but the truth is most of us only really need three types of container: one for storing dry goods like grains and nuts in the pantry; another for leftovers in preparation for freezing/refrigerating/reheating later; and finally one more for keeping things fresh in the fridge (like herbs).

You may already have some reusable containers at home already but if not then check out glass mason jars! They’re cheap enough to buy at local thrift stores or garage sales plus they come with lids so no need for plastic wrap anymore 🙂

Zero Waste Strategy 4. Switch to Menstrual Cups

Menstrual cups are a safe and reusable alternative to tampons and pads. Made of medical grade silicone, they are easy to insert and remove. Menstrual cups can be worn for up to 12 hours (though most women will typically only need them for 6 or 7 hours) and can be worn during swimming, sports or any other activity that could get your period on your clothes or towels. You may need some time to get used to using it, but after that you’ll never want a pad again!

There are three brands available in Australia: the Lena Cup; Fleurcup; and Mpower cup. The Lena Cup comes in two sizes (smaller size is recommended for beginners), while both Fleurcup and Mpower cup have four different sizes so it can fit every person regardless of their anatomy.

Zero Waste Strategy 5. Buy in Bulk or Make Your Own Products

• Buy in Bulk or Make Your Own Products

It’s not always possible to avoid packaging with products, but you can still reduce your waste by buying in bulk and making your own products. By buying food and household goods in bulk, you can reuse and recycle containers that would otherwise be thrown out. Buying in bulk is cheaper than buying individual servings as well, so you can save money while also reducing your impact on the environment! Making your own shampoo or body wash is also an easy way to produce zero-waste goods that are healthier for both humans and ecosystems alike.

Zero Waste Strategy 6. Use Your Own Produce Bag

A produce bag is a reusable bag that you use when you buy produce. You can put all of your fruit and vegetables in it, then use it later for other things, like storing trash or filling with ice to make an ice pack.

You can even buy your own produce bags online! There are many different kinds available, including cloth bags, mylar bags and mesh bags. The best place to get them is at a zero waste store such as Abundance Cooperative Market in Austin, Texas (see Resources). If you don’t live near one of these stores or don’t have access to them yet then try making your own out of old t-shirts or bed sheets because they’re easy to sew together using some basic sewing skills (don’t forget about our Sewing Zero Waste course coming soon!).

Bonus Zero Waste Tip!!

• Buy a reusable water bottle.
• Make your own toothpaste.
• Buy a reusable coffee cup.
• Use a reusable shopping bag for your groceries and other items purchased at the store (or take advantage of bulk-buy pricing).
• Buy in bulk and make your own products, like homemade laundry detergent or dish soap!

Start simple and small, building on your success every day on the journey to zero waste

As you’re building your zero-waste strategy, it’s important to start simple and small. That way, you can find out what works for you before adding too many things into your life at once.

Pick one area of your life to start with: food, beauty products or packaging waste are all great places to start. Find ways to reduce waste in that area—can you bring lunch from home instead of buying it at work? Can you bring reusable containers for snacks on the go? Can you buy bulk items instead of packaged ones? When there is unavoidable waste produced (like from grocery shopping), think about how else it can be reused or recycled before tossing it in the trash bin (think: composting). And finally, if there’s no way around throwing something away completely (like meat bones or waxed fruit peelings), make sure they go into a proper recycling bin if available.

Conclusion

Zero waste is a journey, and it takes time to get there. Start small and build from there. The ultimate goal is to live in harmony with the Earth, so don’t feel bad if you slip up once in awhile! Go here to check the sizes of our bins that may fit for you.

Introduction

If you’re considering installing an egress door, you should know that it’s a different process from installing a regular door. An egress door is required by code in certain situations and can be expensive to install, but the benefits are worth it: They provide the best possible way to get out of your home in case of emergency. To learn more about egress doors and how to install them properly, keep reading! Sydney pet doors will make sure that your pets can easily access inside and outside of your house at their own comfort.

Follow local and building codes.

You should follow local building codes, state building codes, regional building codes, country building codes, city and neighborhood-specific building codes for installing an egress door.

Decide on the best location and type of door.

• Decide on the best location and type of door.

The first step to installing an egress door is deciding how you want to use it, and where you want it to go. You can choose either a single- or double-door setup, but even within those categories there are different options. Single doors tend to be easier than double ones because they don’t open into existing rooms as much, but they may not provide as much ventilation or light. Double doors allow more air flow but take up more space; they also typically require two windowsills instead of just one.

Know your measurements.

• Measure the height, width, and depth of your opening. This will let you know what size egress door you need to order.
• If you’re installing a new door, measure the height and width of your existing opening. This will tell you how large a piece of framing lumber can fit into the hole without being too big for it or creating excess space at either end of your opening. You’ll need this measurement for step four below.

Understand the excavation process.

Excavation is a large part of the egress door installation process. It can be done by hand or machine and either way, it requires a lot of time and energy.

Asking for help from friends and family members during this phase of egress door installation is recommended, but don’t forget to make sure they understand what’s going on before they start digging. That way, you can all work together as a team without any confusion or setbacks.

If you’re using a shovel to excavate your trench, try digging at least 2 feet down so that your foundation will be deep enough for your frame to rest on when it’s finished being installed. The deeper your foundation is set into the ground, the stronger it will be over time as well!

Consider the costs.

Before installing an egress door, be sure to consider the costs. You can budget for it by saving money over time or working with a contractor who will give you a payment plan.

The cost of an egress door is usually less than the cost of installing a new roof on your house. This is because most people would rather pay for something that helps them improve the value of their property than get stuck with more repairs they don’t need right now. The overall cost depends on factors like:

• Size and type of door
• Location

Expect the concrete to cure for at least 28 days.

Concrete will cure faster in warm weather, slower in cold weather and even slower if it is raining. The time it takes for the concrete to cure depends on many factors, including the temperature, humidity and moisture content of the air. Use this guide from Ramset as a rough estimate for how long you should wait before installing an egress door or window well:

• Warm Weather (70° F) – 28 days
• Moderate Weather (60° F) – 30 days
• Cold Weather (40° F) – 36 days

Work with an experienced contractor.

• Find a contractor who is experienced in installing egress doors.
• Ask for references, and check their insurance.
• Ask if they have a warranty on their work.
• Ask them if they have a website or BBB rating (Better Business Bureau).

You should do everything you can to ensure your egress door is installed by someone who knows what they’re doing

If you want to ensure your egress door is installed by someone who knows what they’re doing, there are several things you can do.

First, make sure to hire a professional. You should ask for references and check their license before hiring anyone. Next, ask for a quote so that you know how much it will cost. Lastly, make sure that the person has insurance that covers them while working on your home.

Conclusion

Egress doors are a great way to add value and functionality to your home, but they are also complex and require special attention. You should do everything you can to ensure that your egress door is installed by someone who knows what they’re doing.

Some of the most common household pests are ants, cockroaches, spiders and mosquitos. Just like people, these pests look for food and water sources in your home. Commercial pest control services Brisbane can stop ants, cockroaches, and spider from breeding into your house.

Keep your house clean – Cleanliness deters most pests from entering your home. Remove food sources and keep counters clear. Also, never leave pet food out overnight. Make sure to sweep the floors and wash dishes promptly.

Tidy Up – Clutter provides a place for pests to hide and lay eggs. Pests also use clutter as shelter when they’re trying to get away from their predators such as humans or other pests.

Repair Cracks – Bugs and rodents can enter your home through holes as small as 1/8th of an inch wide. Fix any cracks or crevices you find in your home’s foundation, crawlspaces, windowsills, vents and walls immediately upon discovery.

Use a Dehumidifier in the Crawlspace – High humidity causes moisture buildup in the crawlspace which attracts a variety of different types of pests like termites, spiders and ants.

1. Inspect the property—a proper inspection of the property is important to determine the type and extent of pest infestation.
2. Identify the pests—some pests are seasonal, some are difficult to detect and others may be dangerous.
3. Apply treatment methods—the treatment methods differ from one pest to another. Some common control methods include chemical barriers, traps, spreading pesticides, using natural predators and sealing access points or harborage areas.
4. Fix problems that attract pests—fixing plumbing leaks, clearing debris and maintaining good sanitation are all ways to prevent pest infestation.
5. Reduce risk of future infestations—monitoring for new pests and applying treatment as needed is important for ensuring that the problem does not recur; follow-up inspections are also recommended.

Pest control is the regulation or management of a species defined as a pest, a member of the animal kingdom that impacts adversely on human activities. The human response depends on the importance of the damage done, and will range from tolerance, through deterrence and management, to attempts to completely eradicate the pest. Pest control measures may be performed as part of an integrated pest management strategy.

In agriculture, pests are kept at bay by cultural, chemical and biological means. Ploughing and cultivation of the soil before sowing reduces the pest burden and there is a modern trend to limit the use of pesticides as far as possible. This can be achieved by monitoring the crop, only applying insecticides when necessary, and by growing varieties and crops which are resistant to pests. Where possible, biological means are used, encouraging the natural enemies of the pests and introducing suitable predators or parasites.

In homes and urban environments, the pests are the rodents, birds, insects and other organisms that share the habitat with humans, and that feed on and spoil possessions. Control of these pests is attempted through exclusion, repulsion, physical removal or chemical means. Alternatively, various methods of biological control can be used including sterilisation programmes.

Pests can cause a lot of damage to your home. You should take action at the first sign of an infestation. This article will give you some great advice on how to get rid of pests.

Do you have a recurring issue with fruit flies? You may be breeding them right in your home. Source which drain is the issue and plug it up using a piece of plastic wrap with small holes in it. Wait a day or two, then pour boiling water down the drain to flush. That should keep fruit flies from breeding there.

If you want to plant new trees but you get mice often, place the trees far from your house. Rodents are proficient climbers, and they can use trees to gain access to your roof. Plant them far from your home, about 15 feet away.

The most common type of pest control is done by exterminating insects and vermin with pesticides or setting traps for larger animals like raccoons or squirrels. The most important aspect of pest control is to identify the pest properly. Different pests require different types of extermination — using the wrong technique can be ineffectual at best and dangerous at worst.

Exterminators can be hired directly, but many people choose to use a pest control company to do their dirty work for them. Professional exterminators will not only identify your pests and get rid of them, but they’ll also take steps to prevent them from returning. Read more the preventive method that pest company use.

Bed bugs are small, flat, and parasitic insects that feed on the blood of humans and other mammals. They can be tough to get rid of once they have taken up residence in your home. The best way to prevent a bed bug infestation is to take steps to avoid bringing bed bugs home. Termite pest control Sunshine Coast also covers bed bugs in your home.

After traveling, inspect your luggage and clothes.

Put your luggage in a plastic bag while you inspect it. Before entering your house, remove clothing from the suitcase, put them in the bag, and wash or dry clean all clothes. If you cannot wash or dry clean them immediately upon returning home, store them in a sealed plastic bag until you are able to do so.

Carefully inspect furniture before bringing it into your home.

If you buy used furniture or find some on the side of the road, carefully examine it for signs of bed bugs before bringing it into your house. Don’t buy used mattresses if you can help it — they are nearly impossible to disinfect. Check hotel beds for signs of bed bugs while you’re traveling as well.

Avoid clutter in your home that gives bed bugs places to hide.

Get rid of unnecessary clutter in and around your home; this will make it easier to find any bed bugs that may get inside.

Here are some tips to help you avoid bed bugs and keep them from coming home with you:

Wash all new clothes in hot water before wearing.

When traveling, inspect the hotel room mattress, box spring and headboard. Don’t unpack until you have done so. If you find or suspect bed bugs, ask to be moved to another room or find a new hotel.

When traveling, inspect your luggage carefully before bringing it into your home.

Check items that may be brought into your home such as used furniture or mattresses, or clothes and other items bought at thrift stores or yard sales, for signs of bed bugs. Avoid bringing them into your home if they show any signs of infestation.

The spread of bed bugs is on the rise in the United States, but there are things you can do to reduce your risk of getting them. Learn about how to prevent bed bugs from infesting your home or hotel room when traveling.

Before you travel, check online for recent reports of bed bugs at your destination and in nearby hotels.

When traveling, put all luggage on racks off the floor. Keep luggage away from beds and furniture, and don’t set it on the carpet near beds.

Keep out of rooms with a strong chemical smell or rooms that have been recently sprayed for bugs.

Bed bug infestations are on the rise, but the good news is they can be prevented. The key to prevention is a combination of monitoring, exclusion, sanitation and education. Here’s a look at each of these areas and what you can do to protect yourself from bed bugs:

Monitoring:

Regularly inspect your home for signs of bed bugs. If you have a mattress encasement, inspect it as well.

Exclusion:

To help prevent bed bugs from entering your home or business, use door sweeps on exterior doors and repair damaged window screens. Keep doors closed when not in use and avoid setting items against walls or on the floor in public places where bed bugs may be living. Vacuum regularly and store suitcases away from sleeping areas when not in use.

Sanitation:

Keep clutter in your home to a minimum – especially under beds where bed bugs tend to live and hide. Regularly wash sheets and clothing in hot water, dry on high heat for 30 minutes, or dry clean them if possible. Avoid leaving clothes on the floor or furniture where bed bugs could hide. Wash all stuffed animals periodically too.

Education:

Bed bug bites resemble other insect bites, so it’s important to learn how to identify them. Learn more about educating yourself with different kind of pests that possibly living in your home.